We inspect and service every unit in our
pre-owned inventory and deliver
with a one year parts and labor guarantee!
System set up and training are always available from
Lombard Equipment!
We can arrange shipping across the country and Internationally!
Lombard Equipment, Inc. Ships all around the world and each crate is hand-built, customized to your piece of equipment to ensure a safe delivery!
Click the 4-SALE tabs below!
to see our fully reconditioned
line of collision repair system equipment for sale.
See the Systems Sold tab below for a sampling of our pre-owned systems.
Have pre-owned collision repair equipment you would like to sell? Call us!
- FRAME MACHINES
- MEASURING EQUIPMENT
- WELDING
- MISCELLANEOUS
- SYSTEMS SOLD
Chief/Continetal Posi-Trak Tower
Complete with piston and chain
like new!
ONLY $ 995.00
CHIEF EZ LINER
OTC ELECTRIC HYDRAULIC PUMP
REFURBISHED/USED /
Only $995.00!!
KANSAS JACK POWER POST
5 years old
NEVER been used!!
Complete with Anchor Pots and OTC Hydraulics
ONLY $1,495.00!
3 TOWER CHIEF S21
Excellent Condition
-
Completely Refurbished
-
No rips or tears in deck
-
Good hardware
-
Safety Ramps work
-
Towers have all been adjusted
Only one owner
One year warranty
Call for price!
Frame Machine for sale
Call for Pricing!
See the Systems Sold tab above for a sampling of our pre-owned systems
Have pre-owned collision repair equipment you would like to sell? Call us!
Universal Measuring Systems
Chief
Continental
3 Dimensional measuring system, has been re-calibrated and is complete
In shop training available
Awesome measuring systems, simple to use!
Check out our SOLD equipment for systems we can find for you!
See the Systems Sold tab above for a sampling of our pre-owned systems.
Have pre-owned collision repair equipment you would like to sell?
Call us!
STRONG ARM ELECTRIC WINCH with Remote Control
REFURBISHED/USED
Only $275.00!!!
The equipment below is just a sample of the many systems we sell and service!
Zhongda Spray Booth!
- 8 years old
- Double walled
- Insulated
- 23'L X 13.1" W (Inside Dimension)
- Hip lights w/side lights
- Full pit and full plenum
- 1.5 million BTU Gas/Propane burner
Excellent condition
In use every day
Can see in operation
Super Super Deal!!
$SOLD!
-
18' Deck
-
Tower Extension
-
Complete Clamping
-
Only two owners
-
Comes with warranty
4 TOWER CONTINENTAL UNILINER
Completely refurbished
Ready to ship!!
SOLD!
Pro Spot PR-10 Squeeze Type Resistance Spot Welder
-
Welds all the new steel including Boron -
Good condition
-
Works well
-
Call for Pricing & Shipping!
$SOLD!
Pro Spot PR-2000 Resistance Spot Welder
-
Nice, Nice Welder!
-
Welds all new Steels
-
Single-Side Gun
-
Comes w/Standard Arms and Includes
a C-X Adapter!! -
Excellent Condition -One Year Warranty
Call for Pricing & Shipping!
2 Tower Continental Drive On Bench
-
Portable
-
360° Pulling
-
4 Point Anchoring
-
10 Tons of Pulling Power
-
Open access to both front and rear
SOLD!
4 Tower Continental Versa Rack
-
Electric Hydraulics
-
10 Tons of Pulling Power
-
4 Point Anchoring
-
Removable Crossmembers
SOLD!
Chassis Liner Truck'n Revolution
- * 360 degree pulling
- * Clear Free Towers
- * 10 Tons of Pulling Power
- * Removable Crossmember
Everything works! Nice condition!
SOLD!
Genesis 2 Computerized Electronic Measuring System
Comes with everything!
Good condition
Scanner works
Call for pricing!!
SOLD!
Chief EZ Liner II Frame Machine 
- 4 Towers
- Complete with Accessories
- Electric Winch
- Dead Car Dollies
- Wheel Stands
- 4" & 6" Auxiliary Rams
- Accessory Tool Board
Machine has been mechanically inspected.
Several Rams have been rebuilt, Towers adjusted,
and Electric Pump checked.
SOLD!
Black Hawk World Rack 4000L Drive-on
Collision Repair System
This 21 foot long rack is great for small UniBody's as well as full-sized pick-ups.
Features include:
-
Adjustable Height
-
360 degree Pulling
-
Open center which allows Technicians
to get major access to frame rails and damage.
Very clean and comes with a one year warranty.
SOLD!
Car-O-Liner Speed Frame Machine
Very, very, very little use!
Call for pricing
SOLD!
Chief S21 Frame Machine
- 4 Towers
- 10 Tons
- Electric Hydraulics
- 20' Long
- 88" Wide
Perfect for every hit!
SOLD!
Chief Excelerator
like new condition- hardly used
- 3 tower
- 22ft long
- Adjustable work height
- 10 ton of pulling power at hooks
Removable cross members front and rear.
SOLD!
CHIEF EZII Refurbished
3 tower frame machine
Includes:
- Towers lubricated and adjusted to factory specs
- Swing arm tie down holes cleaned
- Hydraulic system gone through and oil changed
- New clamp hardware.
SOLD!
Refurbished 3 tower Chief Classic frame machine
All serviced:
- Hydraulics
- Hardware
- Pump
- Pulling towers greased and adjusted
This machine is ready to go and comes with a 2 year warranty!
SOLD!
Continental Frame Machine - Pre-owned
- All new hydraulics
- 360% pulling
- 2 pull towers
- And its portable!
SOLD!
2 tower drive on bench
SOLD!
Continental 4 tower Uniliner 10 ton electric over hydraulic frame machine
Like New Condition!
- 16 feet long by 6 foot 10 inches wide
- Completely reconditioned hydraulically and mechanically
- 1 year warranty
SOLD
Chief EZ Liner II
Complete with accessories
Machine was totally rebuilt just 10 months ago
Excellent condition
SOLD
Kansas Jack 2 tower 360 Magna Rack III
18 feet long by 90 inches wide, serviced by a factory trained technician 
All defective hardware changed , clamping and top surface has been reconditioned (painted). Hydraulics rebuilt, comes with tool board and measuring and a 1 year warranty
SOLD
Chief Standard with 3 ten ton towers
Electric over hydraulics 20 feet long, completely redone
SOLD!
Aromaster III Resistance Spot Welder
- Single & Double sided welding
- Includes spot dent puller
- *1yr warranty*
SOLD!
Pro Spot PR2000 resistance welder for sale
Refurbished
This machine is in great working condition.
Includes:
- Dual Acting Gun
- System is 100% Complete
- Comes with 6 months warranty
- Welds mild,boron, AHSS,UAHSS, TRIP and
Stainless Steel - Welds through glue and seam sealer
- Comes with warranty
SOLD!
Pre-owned Prospot PR-10 Liquid Cooled Resistance Welder
Welds Boron Steel, etc. Only single phase welder approved by the factory. Eliminates 50% of the time spent welding
SOLD
Pro Spot PR2000 resistance welder Refurbished
This machine is in great working condition. Includes:
- New Positive and Negative Weld Cables and Electrodes
- Rebuilt Double Sided Gun
- Comes with warranty
SOLD
Magna Rack
18 feet long 7 feet 6inches wide 2 ten towers with 360 degree pulling
New hardware, hydraulics and bearings in excellent condition. comes with one year warranty
SOLD
Chief Express Rack
- New paint
- New decals and skid tape
- Two towers and tower dolly
- OTC Hydraulics hardly used
- Two ten ton rams and pumps
This is a portable machine that came out of a Vocational Tech School and is virtually like new
SOLD
Totally Reconditioned Celette Bench complete with:
- 1- Puller/Rebuilt Pump & Ram
- 1- New Pull Chain with Hook
- 5-Crossmembers
- 22-MZ Bases
- 1-4 Point Clamping System
KJ World Rack
- 17 ft long
- 7feet wide
- Adjustable height
- Two 360 towers
- 10 ton rams and pumps
Hydraulically and mechanically sound and comes with a one year warranty.
SOLD
Continental style frame machine
- Adjustable height
- Two towers
- 15 feet 9 inches long by 6 feet 7 inches wide
SOLD
Chassis Liner Revolution
Frame machine comes with
- Two 360 towers with 10 ton rams
- 4 pinch weld stands
- Truck anchoring package
- Big 18' x 7'2" wide deck
Great machine not only for small cars but also accommodates the wide SUVs and trucks!
SOLD